Skip to product information
1 of 17

Nanpoku

LED Brake Light Bar Sequential Pattern Signaling

LED Brake Light Bar Sequential Pattern Signaling

Regular price $49.99 USD
Regular price Sale price $49.99 USD
Sale Sold out
Shipping calculated at checkout.
Style

ABOUT THIS ITEM: TRIPLE ROW

  • Super Bright: Tailgate Light bar triple row with 432pcs 3528SMD LED chips design which makes the lumen output is 300% brighter than one or double row LED tailgate lighting bars on cars.Adds a clear visibility to the rear drivers, better ensuring your security on roads.Suitable for 12v car and pickup truck.like Tundra ,Sierra,Silverado,Ram Pickup,Titan etc.
  • Full Functions: The tailgate light bar emits low Red light for running, Bright Red for braking, Amber for left/right turning signals, White for reversing, and Flash Amber for emergency strobe light. Everyone behind you exactly knows what's your next step!
  • Note: It should be noted that the light strip can only convey "one message" to the rear vehicle at the same time. Like how the brakes and turn signals change,when braking, the turn signal will stop working, the light bar is all bright red,when you let up on the brake the turn signal (yellow) will continue.
  • Waterproof & All Weather Suitable: Strong self-adhesive tape tape and well conductive standard 4-pin flat plug can easily stuck on where you need.The LED Tailgate Light Bar with IP67 waterproof rate ,works good whatever in rainy or snowy days. And we offer a six-month warranty.
  • EASY INSTALL & UNIVERSAL FITMENT: No Drill Install. Well conductive standard 4-pin flat plug.This tailgate light bar features 60", operated at DC 12V voltage, perfect for most Pickup Trucks, Trailers, Cars, SUV, RV, VAN, etc.Simple installation with User Manual.If you encounter an unsuitable situation, you can try to go to the nearest car repair shop for decoding adaptation. Some car models need to be decoded before they can be used normally.
  • Material: durable dust-proof flexible Rubber Tubing,entirely sealed by PVC.
  • Waterproof Rating: IP67 LED Strip
  • Light length: 60 inches
  • LED Quantity: 432 pcs
  • Package Dimensions: 9.6 x 8.8 x 1.1 inches

ABOUT THIS ITEM: SINGLE ROW

  • INCREDIBLE BRIGHTNESS - The LED Tailgate Bar has 108 LEDs that shine 35% brighter than normal chips and ensure your car can be seen even in thickest traffic, day or night.
  • FLEXIBLE & DURABLE LED LIGHTS - IP67 sealed housing, well protects LED strips against rain drops, snow, dirt and sand, super durable and flexible with up to 30,000 hrs. lifespan
  • NO-DRILLING REQUIRED - it comes with a tough-as-nails adhesive enhancer that increases hold strength over 5X. No need to drill, it will not fall off, included mounting hardware for more secure installation.
  • MOUNTED ANYWHERE WITH 12V POWER SOURCE - 60" LED strips, rated 12V, ultra long for cargo/pickup/camper/garage/RV Awning lighting or household party decoration.
  • Multiple Use - widely used in Truck Bed Light, RV Awning Light, Step Bar LED Lighting, Side Door Led Lamp, Pickup Bed Light Kit, etc. Ideal for DIY. And wide use for Jeep Pickup Truck RV SUV.
  • Package Dimensions: 8.7 x 8.0 x 0.8 inches
  • Multi-functions: Running light, braking light, turning signals, reversing light
  • Color: Red/ White
  • Working Voltage: 12V DC
  • Light Source:108LED 24-26LM/LED
  • LED Strip Length: 60 inches
  • Materials: LED Chip+Silicone
  • Materials: LED Chip+Silicone
  • 5 Full Lighting Modes: Drive with dark red running lights, bright red braking light, flash bright red turn signals, white reverse light.
  • Durable For All Seasons - Being fully silicon-sealed and flexible, it can withstand any bad weather and harsh environment.

INSTALLATION INSTRUCTIONS : (Firstly be sure to decide whether the wire bundle need to be towards the driver side or passenger side by testing when signals lights work properly.)

  1. Peel - After cleaning and dry the mounting surface. Peel off the adhesive tape at the back.
  2. Stick - According to the mounting direction of the wire bundle, stick the light bar to the recessed area between the bottom of the tailgate and the bumper shelf.
  3. Electrical Hook-up - Plug and play the standard flat 4-pin connectors, connect the reverse wire to a 12V DC positive power source.
  4. Additional Hardware - You can also add on an additional mounts and screws we provide to secure the light bar. *Updates: New package will come with 3 clear brackets for more secure installation.

 

View full details